Sling Kontrol - M-LOK
about
Sling Kontrol - MLOK "by" Qwerm
A shameless ripoff of Subrev's M-LOK Sling Control, a M-LOK accessory that helps store your sling when not using your rifle.
Print orientation: Print everything on it's side.
Settings used:
Layer Height: 0.2mm
Wall Line Count: 4
Infill Percentage: 100%
Support: None
Fuzzy Skin: On
Fuzzy Skin Outside Only: On
Fuzzy Skin Thickness: 0.1mm
Fuzzy Skin Density: 10.0/mm
Materials Needed:
1/8 Inch Shock Cord
2x M3x8 Screws
1x M-LOK Mounting Screw and Nut
Directions:
- Mount the larger part to your M-LOK slot.
- Cut a length of shock cord and feed it through the larger part.
- Insert both ends into the smaller part
- Screw in both M3 screws until snug enough to keep the ends of the shock cord from pulling out but not enough for you to strip out the holes.
Credit to SubverTech for the design. For more info check out their website:
https://subrevtech.com/product/sling-control-mlok/
https://subrevtech.com/instructions/
files
| File | Extension |
|---|---|
| SlingKontrolMLOK-release.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
Sling Kontrol - MLOK "by" Qwerm
A shameless ripoff of Subrev's M-LOK Sling Control, a M-LOK accessory that helps store your sling when not using your rifle.
Print orientation: Print everything on it's side.
Settings used:
Layer Height: 0.2mm
Wall Line Count: 4
Infill Percentage: 100%
Support: None
Fuzzy Skin: On
Fuzzy Skin Outside Only: On
Fuzzy Skin Thickness: 0.1mm
Fuzzy Skin Density: 10.0/mm
Materials Needed:
1/8 Inch Shock Cord
2x M3x8 Screws
1x M-LOK Mounting Screw and Nut
Directions:
- Mount the larger part to your M-LOK slot.
- Cut a length of shock cord and feed it through the larger part.
- Insert both ends into the smaller part
- Screw in both M3 screws until snug enough to keep the ends of the shock cord from pulling out but not enough for you to strip out the holes.
Credit to SubverTech for the design. For more info check out their website:
https://subrevtech.com/product/sling-control-mlok/
https://subrevtech.com/instructions/
creator
Metrics
Views
382
Downloads
170
Project Info
release date
Jan 27, 2024
artifact type
library category
fabrication method
fabrication tool
3D Printer
release country
United States
language
English
license
No license
files
| File | Extension |
|---|---|
| SlingKontrolMLOK-release.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
