-------------------------------------------------------------------------------------
WARNING!!!!!!! This is only intended to be used with 22lr, use with any other caliber
could result in injury or death, use at your own risk.
use with any caliber bigger could create shrapnel and cause bodily harm or worse.
--------------------------------------------------------------------------------------
proto width compatible: yes
1/2x28 tpi
--------------------------------------------------------------------------------------
print orientation : threads up off build plate
layer height: 0.14 (important for thread to print properly)
support: touching buildplate
infill: 100%
walls: 10+
----------------------------------------------------------------------------------------
if having issues with fitment, scale up to 102% in the xy direction only
-------------------------------------------------------------------------------------------
for issues regarding the design, message me on element
username : durbanpoisonpew
File | Extension |
---|---|
micro-flash-hider-proto.zip | zip |
Version: 1.0.0 latest
Initial release
-------------------------------------------------------------------------------------
WARNING!!!!!!! This is only intended to be used with 22lr, use with any other caliber
could result in injury or death, use at your own risk.
use with any caliber bigger could create shrapnel and cause bodily harm or worse.
--------------------------------------------------------------------------------------
proto width compatible: yes
1/2x28 tpi
--------------------------------------------------------------------------------------
print orientation : threads up off build plate
layer height: 0.14 (important for thread to print properly)
support: touching buildplate
infill: 100%
walls: 10+
----------------------------------------------------------------------------------------
if having issues with fitment, scale up to 102% in the xy direction only
-------------------------------------------------------------------------------------------
for issues regarding the design, message me on element
username : durbanpoisonpew
1.6K
124
Dec 06, 2022
3D Printer
United States
English
File | Extension |
---|---|
micro-flash-hider-proto.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.