Nephilim Reinforced Lower Receiver v2.0
about
# Nephilim AR-10 Receiver
#### Author
Warfairy
#### Version
2.0
#### Description
This is a 3D printed receiver for the AR-10 platform. It is recommended you print from bottom to top for greatest strength in the buffer tower and takedown pin areas. This lower receiver uses the DPMS pattern.
Credit to LTS From Grabcad.com for their AR-10 receiver forming from which this design was inpsired from and JT and Shadowfall for the basis of the Buffer Tower reinforcement.
#### NOTE
THIS IS AN AR-10. THIS WILL NOT WORK WITH STANDARD AR-15 UPPER RECEIVERS OR LOWER PARTS KITS. DO YOUR RESEARCH BEFORE BUILDING. Please direct all inquiries, criticism, and hate mail to WarFairy at www.fosscad.org/fc/chat
#### Disclaimer
THIS IS UNTESTED. USE CAUTION WHEN TESTFIRING.
files
| File | Extension |
|---|---|
| Nephilim_AR-10_V2.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
# Nephilim AR-10 Receiver
#### Author
Warfairy
#### Version
2.0
#### Description
This is a 3D printed receiver for the AR-10 platform. It is recommended you print from bottom to top for greatest strength in the buffer tower and takedown pin areas. This lower receiver uses the DPMS pattern.
Credit to LTS From Grabcad.com for their AR-10 receiver forming from which this design was inpsired from and JT and Shadowfall for the basis of the Buffer Tower reinforcement.
#### NOTE
THIS IS AN AR-10. THIS WILL NOT WORK WITH STANDARD AR-15 UPPER RECEIVERS OR LOWER PARTS KITS. DO YOUR RESEARCH BEFORE BUILDING. Please direct all inquiries, criticism, and hate mail to WarFairy at www.fosscad.org/fc/chat
#### Disclaimer
THIS IS UNTESTED. USE CAUTION WHEN TESTFIRING.
creator
Metrics
Views
2.2K
Downloads
233
Project Info
release date
Sep 19, 2023
artifact type
Printable project
library category
Printable Firearms
fabrication methods
Primarily Printable, Printable Lower / Frame
fabrication tool
3D Printer
language
English
license
No license
Firearm Info
type
Rifle
caliber
.308 / 7.62x51
part
Lower Receiver
files
| File | Extension |
|---|---|
| Nephilim_AR-10_V2.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
