This is the P.L.A. KMurray (Printed Lever Action). A Printed receiver for the henry H001 .22lr lever guns. This is a printed receiver for a Henry classic lever action in .22LR/L/S. Not to be confused with the locust, which is a printed lever action by SwarmTechDesign. So far this frame has been tested with PLA+. In it's current state it requires one extra screw and nut that you won't find in a parts kit. That is an M4 x 8 socket head screw and M4 nut for the tang-receiver connection. This version will also require drilling out the holes to the final dimension for most of the pins, as well as some general fitting. Huge thanks to KMurray and special thanks to gerold_euerle Twitter this wouldn't have been possible without his help.