Knock Knock, It's CRIME Reinforced Grip (AR-15)
about
Knock Knock, It's CRIME Reinforced Grip (AR-15): Laffs Dynamics
Strengthened variant of the original Knock Knock, It's CRIME AR Grip. The knuckles, inner spine, and central reinforcement strut have been thickened. The knuckles have been recontoured.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 36%+
Support Material Percentage: 20%
Print the grip upside-down.
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
Warning: This is a meme grip. In the event the user unironically mounts this to their home defense weapon with the belief this'll make them a "Top Tier Operator", possible death by cringe may occur.
Put this device ONLY on meme gats; don't cringe and build.
files
| File | Extension |
|---|---|
| KKIC Reinforced Grip (AR-15).zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
Knock Knock, It's CRIME Reinforced Grip (AR-15): Laffs Dynamics
Strengthened variant of the original Knock Knock, It's CRIME AR Grip. The knuckles, inner spine, and central reinforcement strut have been thickened. The knuckles have been recontoured.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 6+
Infill: 36%+
Support Material Percentage: 20%
Print the grip upside-down.
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
Warning: This is a meme grip. In the event the user unironically mounts this to their home defense weapon with the belief this'll make them a "Top Tier Operator", possible death by cringe may occur.
Put this device ONLY on meme gats; don't cringe and build.
creator
Metrics
Views
1.7K
Downloads
395
Project Info
release date
Sep 13, 2023
artifact types
CAD Object, Stereolithic object, Printable project
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Firearm Info
types
Pistol, Rifle, Pistol-Caliber Carbine
platforms
AR-15, AR-9
part
Grip
files
| File | Extension |
|---|---|
| KKIC Reinforced Grip (AR-15).zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
