SL1-S PDW
about
SL1-S PDW: Laffs Dynamics
Variant of the Swarmtech Scarab, a Mac11 based PDW/Pistol, aesthetics inspired by the B+T TP9 and the HK MP7.
Created during development of the original SL1 PDW, this design is a cut down version, with a recontoured grip and triggerguard section.
Omits the buttstock mounting index, and has less material in the frame's dust cover and rear frame for reduced print times and cost.
Hardware list, print settings, and assembly instructions are contained in the README PDF file provided.
Note: The provided PDF is taken directly from the original design's file pack. Print parameters such as orientation of the print on a build plate may vary.
It's HIGHLY recommended you use a printer with a Z axis build height of at least 300mm.
This file pack is for the frame and top covers only. Other printed part files will need to be downloaded from the base design release; links provided in the below text.
Full SL1 PDW files can be found at:
https://defcad.com/library/c10da053-468e-4be5-a7c5-dc39606c0582/
Base Scarab files can be found at:
DefCAD: https://defcad.com/library/b7966581-87a3-4f20-8fa2-627c6f8392a4/
Odysee: https://open.lbry.com/@AreWeCoolYet:7/TheScarab:8
Accreditations:
Swarmtech: Creator of the Scarab pistol/PDW; used the base frame model from their design release. Provided hardware info. Provided images for reference.
files
File | Extension |
---|---|
SL1-S PDW.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
SL1-S PDW: Laffs Dynamics
Variant of the Swarmtech Scarab, a Mac11 based PDW/Pistol, aesthetics inspired by the B+T TP9 and the HK MP7.
Created during development of the original SL1 PDW, this design is a cut down version, with a recontoured grip and triggerguard section.
Omits the buttstock mounting index, and has less material in the frame's dust cover and rear frame for reduced print times and cost.
Hardware list, print settings, and assembly instructions are contained in the README PDF file provided.
Note: The provided PDF is taken directly from the original design's file pack. Print parameters such as orientation of the print on a build plate may vary.
It's HIGHLY recommended you use a printer with a Z axis build height of at least 300mm.
This file pack is for the frame and top covers only. Other printed part files will need to be downloaded from the base design release; links provided in the below text.
Full SL1 PDW files can be found at:
https://defcad.com/library/c10da053-468e-4be5-a7c5-dc39606c0582/
Base Scarab files can be found at:
DefCAD: https://defcad.com/library/b7966581-87a3-4f20-8fa2-627c6f8392a4/
Odysee: https://open.lbry.com/@AreWeCoolYet:7/TheScarab:8
Accreditations:
Swarmtech: Creator of the Scarab pistol/PDW; used the base frame model from their design release. Provided hardware info. Provided images for reference.
creator
organization
Metrics
Views
3.1K
Downloads
382
Project Info
release date
Dec 27, 2022
artifact type
Printable project
library category
Printable Firearms
fabrication methods
Primarily Printable, Hybrid, Printable Lower / Frame
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0
Firearm Info
type
SMG
platform
MAC-11
caliber
9x19mm
part
Lower Receiver
files
# | File | Extension |
---|---|---|
1 | SL1-S PDW.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.