380 ACP / 9mm Kurz Snap Caps V1.0.1
about
380 ACP / 9mm Kurz Snap Caps V1.0.1: FFFTech/FFFTechnology
3D printed snap caps, dimensions of a 380 ACP / 9mm Kurz cartridge.
Two variants are available:
*FMJ
*Hollowpoint
Update: Fixed the advised scaling setting; originally stated to scale +/- .1%, but the intended scaling was meant to be +/- .01%
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .1mm - .14mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 30%+
Infill Pattern: Gyroid
Material Flow: 100%
(Highly advisable to print 3+ copies on a single build plate)
Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.
Accreditation:
Eyeliketurtles: Many thanks for printing and testing the design; as well as providing video footage and photographs. Tested in their Bersa Thunder 380, and their KelTec P3AT. Tested both Hollowpoints and FMJ variants.
files
| File | Extension |
|---|---|
| .380 Snap Caps V1.0.1.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
380 ACP / 9mm Kurz Snap Caps V1.0.1: FFFTech/FFFTechnology
3D printed snap caps, dimensions of a 380 ACP / 9mm Kurz cartridge.
Two variants are available:
*FMJ
*Hollowpoint
Update: Fixed the advised scaling setting; originally stated to scale +/- .1%, but the intended scaling was meant to be +/- .01%
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .1mm - .14mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 30%+
Infill Pattern: Gyroid
Material Flow: 100%
(Highly advisable to print 3+ copies on a single build plate)
Depending on your machine's settings, you might need to scale +/- .01% for best fit of snap caps into the chamber.
Accreditation:
Eyeliketurtles: Many thanks for printing and testing the design; as well as providing video footage and photographs. Tested in their Bersa Thunder 380, and their KelTec P3AT. Tested both Hollowpoints and FMJ variants.
creator
Metrics
Views
1.8K
Downloads
369
Project Info
release date
Mar 07, 2022
artifact type
Printable project
library category
Ammunition
fabrication method
Primarily Printable
fabrication tool
3D Printer
release country
United States
language
English
license
Firearm Info
type
Pistol
calibers
.38 Special, .380 ACP
part
Snap Cap
version hash
QmdTVHk3nqhJWgkVSVEjTmceRp4KTYM2r3nEUarvDvAcuh
files
| File | Extension |
|---|---|
| .380 Snap Caps V1.0.1.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
