ProxyMag AK-74M/101 Magazine

Purchase high-quality prints of Laffs Dynamics designs at avesrails.com

about

ProxyMag AK-74M/101 Magazine: Laffs Dynamics

 

First 3DP dual caliber AK platform magazine, for use in AKs chambered in 5.45x39, or 5.56x45 NATO. Caliber changes are quick via swapping out the follower. Floorplate, baseplate, locking tab, and magazine body are the same between calibers. 

 

Has the same strong separately printed locking tab used in the Waco Waffle and Slabslav series of Laffs Dynamics AKM magazines. 

 

 

Weapons Tested In: 

 

1x WBP Mini Jack 5.56 AK Pistol (Polish Import)

1x M+M M10 5.45 AK Rifle (Romanian Import)

1x PSAK-74 AK Rifle (American Production)

 

 

 

Basic Print Settings:

 

Filament Used: PLA+

 

Print Settings:

 

Extruder: 216C - 220C

Bed: 56C - 60C

First Layer Print Height: .2mm 

Standard Layer Height: .16mm (.12mm for the Follower & Locking Tab)

Wall Thickness: .40 

Wall Perimeters: 8

Infill: 80%+

Support Material Percentage: 18%

 

 

 

Hardware: 

 

1x Original AK-74 mag spring, Beryl mag spring, or listed compatible mag spring. (See Notes)

 

Epoxy or Clear Gorilla Glue

 

 

 

Parts Installation:

 

1) Apply cyanoacrylate adhesive inside the pocket for the rear locking lug. If the rear locking lug is slightly loose 

in the pocket, apply Clear Gorilla Glue. Wait 24hrs for the adhesive to cure. 

 

2) Insert the rear locking lug, with the angled facet facing outwards, and down towards the mag body's base. 

 

3) Lightly sand the anti-friction follower's sides and curved spine. 

 

4) Slide the top of the magazine spring through the front of the follower, above the spring retention tab.

 

5) Attach the floorplate to the bottom of the magazine spring, making sure the first spring winding snaps over the 

retainers. 

 

6) Slide the internal spring assembly into the magazine body.

 

7) Depress the floorplate, and slide on the baseplate. The floorplate's locking tab must index with the channel in the 

baseplate. 

 

 

 

Notes: 

 

1) Polish Beryl, WBP- 5.56/223, Promag AK-74, and Wolff mag springs are compatible with the ProxyMag. 

 

 

 

Accreditations:

 

Sloth: Printed and assembled the magazine. Tested mag fitment and function data with their AK. Provided still images and video footage. 

 

Dafizzlez: Printed and assembled the magazine. Tested mag fitment and function data with their AK. Provided still images.

 

ProSpaceDog: Gave geometry info on their 5.56 AK magazine follower adaptor. Provided images, fitment and function data on their AK.

 

Manyenemiesbringmuchhonor: Provided info on, and set up talks with potential testers.

files

File Extension
ProxyMag 1.1.0.zip zip

versions

Version: ProxyMag V1.1.0 latest

Had previously uploaded older spec files; this upload is meant to be the original.

Version: 1.0.0

initial upload

about

Purchase high-quality prints of Laffs Dynamics designs at avesrails.com

ProxyMag AK-74M/101 Magazine: Laffs Dynamics

 

First 3DP dual caliber AK platform magazine, for use in AKs chambered in 5.45x39, or 5.56x45 NATO. Caliber changes are quick via swapping out the follower. Floorplate, baseplate, locking tab, and magazine body are the same between calibers. 

 

Has the same strong separately printed locking tab used in the Waco Waffle and Slabslav series of Laffs Dynamics AKM magazines. 

 

 

Weapons Tested In: 

 

1x WBP Mini Jack 5.56 AK Pistol (Polish Import)

1x M+M M10 5.45 AK Rifle (Romanian Import)

1x PSAK-74 AK Rifle (American Production)

 

 

 

Basic Print Settings:

 

Filament Used: PLA+

 

Print Settings:

 

Extruder: 216C - 220C

Bed: 56C - 60C

First Layer Print Height: .2mm 

Standard Layer Height: .16mm (.12mm for the Follower & Locking Tab)

Wall Thickness: .40 

Wall Perimeters: 8

Infill: 80%+

Support Material Percentage: 18%

 

 

 

Hardware: 

 

1x Original AK-74 mag spring, Beryl mag spring, or listed compatible mag spring. (See Notes)

 

Epoxy or Clear Gorilla Glue

 

 

 

Parts Installation:

 

1) Apply cyanoacrylate adhesive inside the pocket for the rear locking lug. If the rear locking lug is slightly loose 

in the pocket, apply Clear Gorilla Glue. Wait 24hrs for the adhesive to cure. 

 

2) Insert the rear locking lug, with the angled facet facing outwards, and down towards the mag body's base. 

 

3) Lightly sand the anti-friction follower's sides and curved spine. 

 

4) Slide the top of the magazine spring through the front of the follower, above the spring retention tab.

 

5) Attach the floorplate to the bottom of the magazine spring, making sure the first spring winding snaps over the 

retainers. 

 

6) Slide the internal spring assembly into the magazine body.

 

7) Depress the floorplate, and slide on the baseplate. The floorplate's locking tab must index with the channel in the 

baseplate. 

 

 

 

Notes: 

 

1) Polish Beryl, WBP- 5.56/223, Promag AK-74, and Wolff mag springs are compatible with the ProxyMag. 

 

 

 

Accreditations:

 

Sloth: Printed and assembled the magazine. Tested mag fitment and function data with their AK. Provided still images and video footage. 

 

Dafizzlez: Printed and assembled the magazine. Tested mag fitment and function data with their AK. Provided still images.

 

ProSpaceDog: Gave geometry info on their 5.56 AK magazine follower adaptor. Provided images, fitment and function data on their AK.

 

Manyenemiesbringmuchhonor: Provided info on, and set up talks with potential testers.

Download

Metrics

Views

1.6K

Downloads

230

Project Info

release date

Feb 16, 2024

artifact types

CAD Object, Stereolithic object, Printable project

library category

Printable Magazines

fabrication methods

Primarily Printable, Hybrid

release country

United States

language

English

license

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International

Firearm Info

types

Pistol, Rifle

platforms

AK-74, AKS-74

calibers

5.45x39, .223 / 5.56x45

part

Magazine

files

File Extension
ProxyMag 1.1.0.zip zip

versions

Version: ProxyMag V1.1.0 latest

Had previously uploaded older spec files; this upload is meant to be the original.

Version: 1.0.0

initial upload

The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.

Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed

Javascript & cookies are required to view this site.