ARK Slipstream Grip
about
ARK Slipstream Grip: FFFTech/FFFTechnology
An ARK platform port of the 3FTech released Scorpion Evo 3 Slipstream Grip. This version has a smaller cross-section, and has ridges that wrap around the sides of the grip, following the front section's contours.
Mounts to:
* ARK V1
* ARK V1 DLC Expansion
* REDACTED
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
Accreditations:
InvaderZip: In collaboration for previous DLC grip design, and for designing REDACTED grip. Provided data on specific weapon disassembly, and grip interfacing geometry to create a template from.
files
| File | Extension |
|---|---|
| ARK Slipstream Grip.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
ARK Slipstream Grip: FFFTech/FFFTechnology
An ARK platform port of the 3FTech released Scorpion Evo 3 Slipstream Grip. This version has a smaller cross-section, and has ridges that wrap around the sides of the grip, following the front section's contours.
Mounts to:
* ARK V1
* ARK V1 DLC Expansion
* REDACTED
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 18%
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
Accreditations:
InvaderZip: In collaboration for previous DLC grip design, and for designing REDACTED grip. Provided data on specific weapon disassembly, and grip interfacing geometry to create a template from.
creator
Metrics
Views
1.1K
Downloads
123
Project Info
release date
Jun 08, 2022
artifact type
Printable project
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
fabrication tool
3D Printer
release country
United States
language
English
license
Firearm Info
type
Rifle
platform
ARK
part
Grip
version hash
QmXLwsAN6ZVBxxzTyj1cKt2r5mSMkXMhop2LSspnHoj6CZ
files
| File | Extension |
|---|---|
| ARK Slipstream Grip.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
