GoldCorp AKM Mag 30

Purchase high-quality prints of Laffs Dynamics designs at avesrails.com

about

GoldCorp AKM Mag 30: Laffs Dynamics

 

GoldCorp PMC can be deployed anywhere in the world, at any time. Often when things go south in the Balkans, (As they do.) GoldCorp PMCs are sent in for "peacekeeping". For when the Blue Helmets just won't do, a single member of GoldCorp with an AK can take on 30 slavs at once!

 

30rd magazine with GoldCorp PMC labeled on both sides. Has ridging down the spine of the mag body for ease of retention during reloads. 

 

 

 

Printer Used: Ender 3 V2

 

Filament Used: PLA+

 

Print Settings:

 

Extruder: 220C

Bed: 56C 

First Layer Print Height: .2mm 

Standard Layer Height: .16mm

Wall Perimeters: 7+ 

Infill: 45%+

Support Material Percentage: 18%

 

 

 

Hardware Needed:

 

1x 30rd Length AK Mag Spring

 

1x 30rd Length AR-15 Mag Spring (OPTIONAL)

 

 

 

Parts Installation:

 

1) Apply cyanoacrylate adhesive inside the pocket for the rear locking lug. If the rear locking lug is slightly loose in the pocket, apply Clear Gorilla Glue. Wait 24hrs for the adhesive to cure. 

 

2) Insert the rear locking lug, with the angled facet facing outwards, and down towards the mag body's base. 

 

3) Lightly sand the anti-friction follower's sides and curved spine. 

 

4) Slide the top of the magazine spring through the front of the follower, above the spring retention tab.

 

5) Attach the floorplate to the bottom of the magazine spring, making sure the first spring winding snaps over the retainers. 

 

6) Slide the internal spring assembly into the magazine body.

 

7) Depress the floorplate, and slide on the baseplate. The floorplate's locking tab must index with the channel in the baseplate. 

 

 

 

Notes: 

 

1) Bulgarian, Korean, and US based Magpul springs have been tested.

 

2) Bulgarian Slabside Polymer AK mag followers, floorplates, and baseplates are compatible with the Waco Waffle series of magazines. 

 

 

 

 

Accreditations:

 

Dianexis: Design inspired by GoldCorp magazines sold by TheMagProject; a weapon magazine vendor of which the credited individual runs. Gave permission for the creation of the mag design with the GoldCorp logo and provided logo templates.

 

Cultivated Laser: Design inspired by GoldCorp magazines sold by TheMagProject; a weapon magazine vendor of which the credited individual creates designs for via digital imaging and laser engraving. 

files

File Extension
GoldCorp AKM Mag 30.zip zip

versions

Version: 1.0.0 latest

initial upload

about

Purchase high-quality prints of Laffs Dynamics designs at avesrails.com

GoldCorp AKM Mag 30: Laffs Dynamics

 

GoldCorp PMC can be deployed anywhere in the world, at any time. Often when things go south in the Balkans, (As they do.) GoldCorp PMCs are sent in for "peacekeeping". For when the Blue Helmets just won't do, a single member of GoldCorp with an AK can take on 30 slavs at once!

 

30rd magazine with GoldCorp PMC labeled on both sides. Has ridging down the spine of the mag body for ease of retention during reloads. 

 

 

 

Printer Used: Ender 3 V2

 

Filament Used: PLA+

 

Print Settings:

 

Extruder: 220C

Bed: 56C 

First Layer Print Height: .2mm 

Standard Layer Height: .16mm

Wall Perimeters: 7+ 

Infill: 45%+

Support Material Percentage: 18%

 

 

 

Hardware Needed:

 

1x 30rd Length AK Mag Spring

 

1x 30rd Length AR-15 Mag Spring (OPTIONAL)

 

 

 

Parts Installation:

 

1) Apply cyanoacrylate adhesive inside the pocket for the rear locking lug. If the rear locking lug is slightly loose in the pocket, apply Clear Gorilla Glue. Wait 24hrs for the adhesive to cure. 

 

2) Insert the rear locking lug, with the angled facet facing outwards, and down towards the mag body's base. 

 

3) Lightly sand the anti-friction follower's sides and curved spine. 

 

4) Slide the top of the magazine spring through the front of the follower, above the spring retention tab.

 

5) Attach the floorplate to the bottom of the magazine spring, making sure the first spring winding snaps over the retainers. 

 

6) Slide the internal spring assembly into the magazine body.

 

7) Depress the floorplate, and slide on the baseplate. The floorplate's locking tab must index with the channel in the baseplate. 

 

 

 

Notes: 

 

1) Bulgarian, Korean, and US based Magpul springs have been tested.

 

2) Bulgarian Slabside Polymer AK mag followers, floorplates, and baseplates are compatible with the Waco Waffle series of magazines. 

 

 

 

 

Accreditations:

 

Dianexis: Design inspired by GoldCorp magazines sold by TheMagProject; a weapon magazine vendor of which the credited individual runs. Gave permission for the creation of the mag design with the GoldCorp logo and provided logo templates.

 

Cultivated Laser: Design inspired by GoldCorp magazines sold by TheMagProject; a weapon magazine vendor of which the credited individual creates designs for via digital imaging and laser engraving. 

Download

Metrics

Views

367

Downloads

30

Project Info

release date

Feb 13, 2024

artifact type

Printable project

library category

Printable Magazines

fabrication method

Primarily Printable

fabrication tool

3D Printer

release country

United States

language

English

license

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International

Firearm Info

type

Rifle

platforms

AK-47, AKM

caliber

7.62x39

part

Magazine

files

File Extension
GoldCorp AKM Mag 30.zip zip

versions

Version: 1.0.0 latest

initial upload

The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.

Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed

Javascript & cookies are required to view this site.