AR - Evo Grip Adaptor
about
AR - Evo Grip Adaptor: FFFTech/FFFTechnology & Insertmeow
An adaptor designed for mounting standard AR-15 grips to the CZ Scorpion Evo 3 and AWCY? Sczorpion.
Printer Used: Monoprice Maker Select
Plus Filament Used: PLA+
Print Settings:
- Extruder: 218C
- Bed: 54C
- First Layer Print Height: .18mm
- Standard Layer Height: .14mm
- Wall Thickness: .40
- Wall Perimeters: 4 - 5
- Infill: 25%
- Infill Pattern: Gyroid
- Material Flow: 100%
- Support Material Percentage: 20%
Print the adaptor upside-down.
Hardware Required:
- 1x M4x30mm Bolt
- 1x M4 Hex Nut
- 1x Allen Head Screw, 1/4-28 x 1"
- 1x Steel Star Washer
Accreditation:
- Justinhates: For test fitting the grip adaptor, and providing images. Origin of design request.
- Insertmeow: Original designer of the CZ Sczorpion MOE Grips, which this design uses the top portion of his grip model. Also he had been working unbeknownst to me, on the same project in 2020; though it's slightly different in geometry.
files
| File | Extension |
|---|---|
| AR-Evo Grip Adaptor.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
AR - Evo Grip Adaptor: FFFTech/FFFTechnology & Insertmeow
An adaptor designed for mounting standard AR-15 grips to the CZ Scorpion Evo 3 and AWCY? Sczorpion.
Printer Used: Monoprice Maker Select
Plus Filament Used: PLA+
Print Settings:
- Extruder: 218C
- Bed: 54C
- First Layer Print Height: .18mm
- Standard Layer Height: .14mm
- Wall Thickness: .40
- Wall Perimeters: 4 - 5
- Infill: 25%
- Infill Pattern: Gyroid
- Material Flow: 100%
- Support Material Percentage: 20%
Print the adaptor upside-down.
Hardware Required:
- 1x M4x30mm Bolt
- 1x M4 Hex Nut
- 1x Allen Head Screw, 1/4-28 x 1"
- 1x Steel Star Washer
Accreditation:
- Justinhates: For test fitting the grip adaptor, and providing images. Origin of design request.
- Insertmeow: Original designer of the CZ Sczorpion MOE Grips, which this design uses the top portion of his grip model. Also he had been working unbeknownst to me, on the same project in 2020; though it's slightly different in geometry.
Metrics
Views
2K
Downloads
357
Project Info
release date
Oct 4, 2021
artifact type
Printable project
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
release country
United States
language
English
license
No license
Firearm Info
type
Pistol-Caliber Carbine
platform
Scorpion EVO
part
Grip
version hash
QmNcfaeW1VNLd1pBKHYho2viogbi4u7N82mY21tTG3fErB
files
| # | File | Extension |
|---|---|---|
| 1 | AR-Evo Grip Adaptor.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
