Laffs PDW XL Sights

Purchase high-quality prints of Laffs Dynamics designs at avesrails.com

about

Laffs PDW XL Sights: Laffs Dynamics

 

Taller variant of the original 3FTech/Laffs PDW Sights. 

 

Have gotten numerous requests for a slightly taller version over last couple years. 

 

Raised it up 8mm. Still uses previous version's swappable rear sight inserts and same set screw for the front sight post.

 

 

Three rear drift sights are available:

 

 *4mm U Notch

 *5mm U Notch

 *5.5mm Aperture

 

 

Note: For those people that wanted it "AR" height... no :3 I aint raising them up 30mm+. They meant for guns like the Scorpion Evo 3, PS90, 

GHM9, and Stribog SP9. These sights are not percise enough for carbine use and I don't wanna hear people complain about accuracy if I made 

such a variant. They're fine for PDW/SMG/PCC usage. 

 

 

Original Laffs PDW Sights files can be found on DefCAD: 

 

Link: https://defcad.com/library/51bd2005-1f97-4ab9-8e4d-2a320bcd4ba0/

 

 

 

Printer Used: Ender 3 V2

 

Filament Used: PLA+

 

Print Settings:

 

Extruder: 220C 

Bed: 56C 

First Layer Print Height: .20mm 

Standard Layer Height: .12mm

Wall Thickness: .40mm

Wall Perimeters: 6+

Infill: 38%+

Support Material Percentage: 20%

 

Print the front and rear sight mounts on their front faces, and the rear sight drift on it's rear, flattest face.

 

 

 

Hardware Needed: 

 

2x M5x30 Hex Socketed Machine Screw/Bolt

 

2x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)

 

1x M3x10 Set Screw

files

File Extension
Laffs PDW XL Sights.zip zip

versions

Version: 1.0.0 latest

initial upload

about

Purchase high-quality prints of Laffs Dynamics designs at avesrails.com

Laffs PDW XL Sights: Laffs Dynamics

 

Taller variant of the original 3FTech/Laffs PDW Sights. 

 

Have gotten numerous requests for a slightly taller version over last couple years. 

 

Raised it up 8mm. Still uses previous version's swappable rear sight inserts and same set screw for the front sight post.

 

 

Three rear drift sights are available:

 

 *4mm U Notch

 *5mm U Notch

 *5.5mm Aperture

 

 

Note: For those people that wanted it "AR" height... no :3 I aint raising them up 30mm+. They meant for guns like the Scorpion Evo 3, PS90, 

GHM9, and Stribog SP9. These sights are not percise enough for carbine use and I don't wanna hear people complain about accuracy if I made 

such a variant. They're fine for PDW/SMG/PCC usage. 

 

 

Original Laffs PDW Sights files can be found on DefCAD: 

 

Link: https://defcad.com/library/51bd2005-1f97-4ab9-8e4d-2a320bcd4ba0/

 

 

 

Printer Used: Ender 3 V2

 

Filament Used: PLA+

 

Print Settings:

 

Extruder: 220C 

Bed: 56C 

First Layer Print Height: .20mm 

Standard Layer Height: .12mm

Wall Thickness: .40mm

Wall Perimeters: 6+

Infill: 38%+

Support Material Percentage: 20%

 

Print the front and rear sight mounts on their front faces, and the rear sight drift on it's rear, flattest face.

 

 

 

Hardware Needed: 

 

2x M5x30 Hex Socketed Machine Screw/Bolt

 

2x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)

 

1x M3x10 Set Screw

Download

Metrics

Views

1.1K

Downloads

139

Project Info

release date

Feb 28, 2024

artifact type

Printable project

library category

Printable Peripherals / Parts

fabrication method

Primarily Printable

fabrication tool

3D Printer

release country

United States

language

English

license

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International

Firearm Info

type

Pistol-Caliber Carbine

part

Sights

files

File Extension
Laffs PDW XL Sights.zip zip

versions

Version: 1.0.0 latest

initial upload

The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.

Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed

Javascript & cookies are required to view this site.