10/22 Tri Taper Mini Flash Suppressor

about

10/22 Tri Taper Mini Flash Suppressor: Laffs Dynamics

A flash suppressor with three straight prongs, each with a rounded taper towards their tips. The inner hollow section is 
straight walled. Roughly 7mm shorter than the original model. Attaches to OEM Ruger 10/22 barrels.


Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 220C 
Bed: 56C 
First Layer Print Height: .18mm 
Standard Layer Height: .16mm
Wall Thickness: .40 
Wall Perimeters: 5 - 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%


Hardware Needed: 

1x M3x16 Set Screw


SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired. 

files

File Extension
22 Tri Taper Mini Flash Suppressor V1.0.1/10-22 Tri Taper Point Mini FS V1.0.1.zip zip

versions

Version: 10/22 Tri Taper Mini Flash Suppressor V1.0.1 latest

10/22 Tri Taper Mini Flash Suppressor V1.0.1: Laffs Dynamics

 

A flash suppressor with three straight prongs, each with a rounded taper towards their tips. The inner hollow section is 

straight walled. Roughly 7mm shorter than the original model. Attaches to OEM Ruger 10/22 barrels.

 

 

Update V1.0.2: Changed recommended printer and print settings to the commonly used Ender 3.

 

 

 

Printer Used: Ender 3 V2

 

Filament Used: PLA+

 

Print Settings:

 

Extruder: 218C 

Bed: 56C 

First Layer Print Height: .2mm 

Standard Layer Height: .16mm

Wall Thickness: .40 

Wall Perimeters: 6

Infill: 100%

 

 

 

Hardware Needed: 

 

1x M3x16 Set Screw

 

 

SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to 

print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be 

used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired. 

Version: 1.0.0

Initial release

about

10/22 Tri Taper Mini Flash Suppressor: Laffs Dynamics

A flash suppressor with three straight prongs, each with a rounded taper towards their tips. The inner hollow section is 
straight walled. Roughly 7mm shorter than the original model. Attaches to OEM Ruger 10/22 barrels.


Printer Used: Ender 3 V2

Filament Used: PLA+

Print Settings:

Extruder: 220C 
Bed: 56C 
First Layer Print Height: .18mm 
Standard Layer Height: .16mm
Wall Thickness: .40 
Wall Perimeters: 5 - 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%


Hardware Needed: 

1x M3x16 Set Screw


SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired. 

download

Metrics

Views

1.8K

Downloads

190

Project Info

release date

Mar 16, 2023

artifact type

Printable project

library category

Printable Peripherals / Parts

fabrication method

Primarily Printable

fabrication tool

3D Printer

release country

United States

language

English

license

Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International

Firearm Info

type

Rifle

platform

10/22

caliber

.22LR

part

Muzzle Device

files

File Extension
22 Tri Taper Mini Flash Suppressor V1.0.1/10-22 Tri Taper Point Mini FS V1.0.1.zip zip

versions

Version: 10/22 Tri Taper Mini Flash Suppressor V1.0.1 latest

10/22 Tri Taper Mini Flash Suppressor V1.0.1: Laffs Dynamics

 

A flash suppressor with three straight prongs, each with a rounded taper towards their tips. The inner hollow section is 

straight walled. Roughly 7mm shorter than the original model. Attaches to OEM Ruger 10/22 barrels.

 

 

Update V1.0.2: Changed recommended printer and print settings to the commonly used Ender 3.

 

 

 

Printer Used: Ender 3 V2

 

Filament Used: PLA+

 

Print Settings:

 

Extruder: 218C 

Bed: 56C 

First Layer Print Height: .2mm 

Standard Layer Height: .16mm

Wall Thickness: .40 

Wall Perimeters: 6

Infill: 100%

 

 

 

Hardware Needed: 

 

1x M3x16 Set Screw

 

 

SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to 

print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be 

used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired. 

Version: 1.0.0

Initial release

The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.

Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed

Javascript & cookies are required to view this site.