Remington 870 Optic Rail
about
Remington 870 Optic Rail: Laffs Dynamics
Rail for the Remington 870 shotgun, for use with small form factor optics such as the Sig Romeo 5, Holosun HS403B, etc.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 100%
Hardware Needed:
3x #6-48 x 1/4" Fillister Head Gun Screws
Note: This is for newer Remington 870s that have 3 pre-drilled and tapped mount holes instead of the older 4 hole config.
files
| File | Extension |
|---|---|
| Rem 870 Optic Rail.zip | zip |
versions
Version: 1.0.0 latest
initial upload
about
Remington 870 Optic Rail: Laffs Dynamics
Rail for the Remington 870 shotgun, for use with small form factor optics such as the Sig Romeo 5, Holosun HS403B, etc.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 100%
Hardware Needed:
3x #6-48 x 1/4" Fillister Head Gun Screws
Note: This is for newer Remington 870s that have 3 pre-drilled and tapped mount holes instead of the older 4 hole config.
creator
Metrics
Views
1K
Downloads
117
Project Info
release date
Jun 28, 2023
artifact types
CAD Object, Stereolithic object
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Firearm Info
type
Shotgun
platform
Remington 870
caliber
12ga
part
Rail Mount
files
| File | Extension |
|---|---|
| Rem 870 Optic Rail.zip | zip |
versions
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
