WELCOME TO THE PARAGON19X
Least amount of information will be provided so you actually read it!
INFO
- This is a remix of IPrintShit's "Paragon 9". He gave me the STEP file, asked me to fix it, so I did. Then I asked if I could remix it too, he said go ahead, so this is what you get.
- There's a handgun frame and a PCC frame - the PCC one is for braces and stocks.
- There's a 17rd Glock mag compatible version of each frame, and a printed mag (or XL printed or 33rd oem mag) version of each from too (it feels better, doesn't need the nub where the pinky goes)
- Consider buying the endplate charging handle, not necessary, but you'll thank me.
- Print it rails down or I'll fight you.
- 8 walls, 100% infill all the things
- use the 5 degree stocks or mounts if you're not using a Red Dot Sight (RDS).
BOM
Suggested Charging Handle:
https://www.tacticalgalaxy.com/blank-black-slide-racker-charging-handle-for-glock.html
Handgun:
- Glock 19 Gen3 Parts
- Glock 19 FMDA Rails
- 17rd Glock Mag / 17rd Ghost Spring (ebay) for printed mag / 21rd or 33rd OEM mag / XL DMB Magazine
PCC:
- Glock 19 Gen3 Parts
- Glock 19 FMDA Rails
- 17rd Glock Mag / 17rd Ghost Spring (ebay) for printed mag / 21rd or 33rd OEM mag / XL DMB Magazine
- 2x M5-25 SHCS
- 2x M5-40 SHCS
- 4x M5 Hex Nuts
Threaded Rod Stock:
- 4x M3-20 SHCS
- 4x M3 Hex Nuts
- 2x M5-30 SHCS
- 2x M5 Hex Nuts
- 2x 1/4-20 Hex Nuts
- 1x 1/4-20 Threaded Rod (trimmed to ~9 inches)
Reach out to me on X or IG if you have questions. Links can be found on unseenkiller.com
File | Extension |
---|---|
Unseenkiller - Paragon 19X.zip | zip |
Version: 1.0.0 latest
initial upload
WELCOME TO THE PARAGON19X
Least amount of information will be provided so you actually read it!
INFO
- This is a remix of IPrintShit's "Paragon 9". He gave me the STEP file, asked me to fix it, so I did. Then I asked if I could remix it too, he said go ahead, so this is what you get.
- There's a handgun frame and a PCC frame - the PCC one is for braces and stocks.
- There's a 17rd Glock mag compatible version of each frame, and a printed mag (or XL printed or 33rd oem mag) version of each from too (it feels better, doesn't need the nub where the pinky goes)
- Consider buying the endplate charging handle, not necessary, but you'll thank me.
- Print it rails down or I'll fight you.
- 8 walls, 100% infill all the things
- use the 5 degree stocks or mounts if you're not using a Red Dot Sight (RDS).
BOM
Suggested Charging Handle:
https://www.tacticalgalaxy.com/blank-black-slide-racker-charging-handle-for-glock.html
Handgun:
- Glock 19 Gen3 Parts
- Glock 19 FMDA Rails
- 17rd Glock Mag / 17rd Ghost Spring (ebay) for printed mag / 21rd or 33rd OEM mag / XL DMB Magazine
PCC:
- Glock 19 Gen3 Parts
- Glock 19 FMDA Rails
- 17rd Glock Mag / 17rd Ghost Spring (ebay) for printed mag / 21rd or 33rd OEM mag / XL DMB Magazine
- 2x M5-25 SHCS
- 2x M5-40 SHCS
- 4x M5 Hex Nuts
Threaded Rod Stock:
- 4x M3-20 SHCS
- 4x M3 Hex Nuts
- 2x M5-30 SHCS
- 2x M5 Hex Nuts
- 2x 1/4-20 Hex Nuts
- 1x 1/4-20 Threaded Rod (trimmed to ~9 inches)
Reach out to me on X or IG if you have questions. Links can be found on unseenkiller.com
1.8K
112
Jul 10, 2024
CAD Object, Stereolithic object
United States
English
No license
File | Extension |
---|---|
Unseenkiller - Paragon 19X.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.