UBAR-9 Winterized: Laffs Dynamics
Variant of the RK Spookware UBAR-9, a AR-15 based lower receiver for chambering the 9x19mm cartridge. Uses double stack 9mm Glock magazines.
Design Variant Features:
*Enlarged front of the trigger guard for use with gloves.
*Removed material behind trigger guard.
*Rounded the front section of the magwell.
*Added wrapped ridges down the front of the magwell.
*Added modifier designer's logo.
*Strengthened the mag release hinge point.
*Added channels within the magwell for less friction during insertion/removal.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 50%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Notes:
This file pack is for the receiver only. Other printed part files will need to be downloaded from the base design release; links provided in the below text.
Base UBAR-9 files can be found on DefCAD & Odysee:
DefCAD: N/A
Odysee: https://odysee.com/@RKSpookware:2/UBAR9:0
(Other print settings and the hardware list will be provided in the base data pack)
Hardware for the UBAR-9 can be bought from: https://rkspookware.com/ubar-9-lower-receiver-hardware-kit/
Accreditations:
RK Spookware: Creator of the UBAR-9 Receiver; used the base receiver model from their design release. Provided hardware. Provided images for reference.
File | Extension |
---|---|
UBAR-9W V1.0.1.zip | zip |
Version: UBAR-9W V1.0.1 latest
UBAR-9W V1.0.1 (Winterized): Laffs Dynamics
Variant of the RK Spookware UBAR-9, a AR-15 based lower receiver for chambering the 9x19mm cartridge. Uses double stack 9mm Glock magazines.
Design Variant Features:
*Enlarged front of the trigger guard for use with gloves.
*Removed material behind trigger guard.
*Rounded the front section of the magwell.
*Added wrapped ridges down the front of the magwell.
*Added modifier designer's logo.
*Strengthened the mag release hinge point.
*Added channels within the magwell for less friction during insertion/removal.
Update V1.0.1: Redesignated design nomenclature.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 50%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Notes:
This file pack is for the receiver only. Other printed part files will need to be downloaded from the base design release; links provided in the below text.
Base UBAR-9 files can be found on DefCAD & Odysee:
DefCAD: https://defcad.com/library/b0bf3c45-de63-4f87-a1a2-d8d60a5a4406/
Odysee: https://odysee.com/@RKSpookware:2/UBAR9:0
(Other print settings and the hardware list will be provided in the base data pack)
Hardware for the UBAR-9 can be bought from: https://rkspookware.com/ubar-9-lower-receiver-hardware-kit/
Accreditations:
RK Spookware: Creator of the UBAR-9 Receiver; used the base receiver model from their design release. Provided hardware. Provided images for reference.
Version: 1.0.0
Initial release
UBAR-9 Winterized: Laffs Dynamics
Variant of the RK Spookware UBAR-9, a AR-15 based lower receiver for chambering the 9x19mm cartridge. Uses double stack 9mm Glock magazines.
Design Variant Features:
*Enlarged front of the trigger guard for use with gloves.
*Removed material behind trigger guard.
*Rounded the front section of the magwell.
*Added wrapped ridges down the front of the magwell.
*Added modifier designer's logo.
*Strengthened the mag release hinge point.
*Added channels within the magwell for less friction during insertion/removal.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 50%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Notes:
This file pack is for the receiver only. Other printed part files will need to be downloaded from the base design release; links provided in the below text.
Base UBAR-9 files can be found on DefCAD & Odysee:
DefCAD: N/A
Odysee: https://odysee.com/@RKSpookware:2/UBAR9:0
(Other print settings and the hardware list will be provided in the base data pack)
Hardware for the UBAR-9 can be bought from: https://rkspookware.com/ubar-9-lower-receiver-hardware-kit/
Accreditations:
RK Spookware: Creator of the UBAR-9 Receiver; used the base receiver model from their design release. Provided hardware. Provided images for reference.
4.4K
477
Mar 13, 2023
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
UBAR-9W V1.0.1.zip | zip |
Version: UBAR-9W V1.0.1 latest
UBAR-9W V1.0.1 (Winterized): Laffs Dynamics
Variant of the RK Spookware UBAR-9, a AR-15 based lower receiver for chambering the 9x19mm cartridge. Uses double stack 9mm Glock magazines.
Design Variant Features:
*Enlarged front of the trigger guard for use with gloves.
*Removed material behind trigger guard.
*Rounded the front section of the magwell.
*Added wrapped ridges down the front of the magwell.
*Added modifier designer's logo.
*Strengthened the mag release hinge point.
*Added channels within the magwell for less friction during insertion/removal.
Update V1.0.1: Redesignated design nomenclature.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Perimeters: 8+
Infill: 50%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Notes:
This file pack is for the receiver only. Other printed part files will need to be downloaded from the base design release; links provided in the below text.
Base UBAR-9 files can be found on DefCAD & Odysee:
DefCAD: https://defcad.com/library/b0bf3c45-de63-4f87-a1a2-d8d60a5a4406/
Odysee: https://odysee.com/@RKSpookware:2/UBAR9:0
(Other print settings and the hardware list will be provided in the base data pack)
Hardware for the UBAR-9 can be bought from: https://rkspookware.com/ubar-9-lower-receiver-hardware-kit/
Accreditations:
RK Spookware: Creator of the UBAR-9 Receiver; used the base receiver model from their design release. Provided hardware. Provided images for reference.
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.