"The Classic" Grip (S&W M&P Bodyguard 38): FFFTech/FFFTechnology
A traditional square butt grip for the Smith & Wesson M & P Bodyguard 38 revolver. 11mm longer than the OEM grip, allowing for one to get their last finger on the grip. The grip swells from 22.4mm out to 26.7mm.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4+
Infill: 32%%
Infill Pattern: Gyroid
Material Flow: 100%
File | Extension |
---|---|
The Classic Grip.zip | zip |
Version: 1.0.0 latest
Initial release
"The Classic" Grip (S&W M&P Bodyguard 38): FFFTech/FFFTechnology
A traditional square butt grip for the Smith & Wesson M & P Bodyguard 38 revolver. 11mm longer than the OEM grip, allowing for one to get their last finger on the grip. The grip swells from 22.4mm out to 26.7mm.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4+
Infill: 32%%
Infill Pattern: Gyroid
Material Flow: 100%
1.7K
Jun 15, 2022
3D Printer
United States
English
QmdmJwQA5QBtfhkfqvN3d3M55Q56rxbMc8qPGpTcM7TQYE
File | Extension |
---|---|
The Classic Grip.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.