Update. finally solved tolerance issues with pla+ print with 6 walls 90% infill. i also reccomend using a polymer paint to finalize the look. feel and dirability of the frame. it fires fine without reinforcement but i use rustolium truck bed coaring for a more proffesional finish. enjoy!
My personal fix to a frame .stl I originally bought off cults3d for the PY2A website's rails. After I found issues with the original frame and rail design from the website. I realized that both frames have a major problem with the front rail missing a slot for the slide lock spring on the frame because the hole was designed too small to print on most printers and there was a gap where the recoil spring rod seats. I liked the compact design soo much. I decided to try and fix the problems by creating a part that simulates both missing components because of the cheap pressed sheet metal style rails. I did have to cut the rails to fit the compact frame. but in concept this part should also fit the original style frames from the website. Either way I included the frame I used with the new part. and a rmr plate just in case you dont have one. if you need further instructions on how to cut the rails to fit. let me know. ill post a youtube video or something.
File | Extension |
---|---|
sev3n's py2a g19 sls insert.stl | stl |
sev3n's g19 rmr slide cover plate.stl | stl |
sev3n's g19 py2a frame.stl | stl |
Version: 1.5.0 latest
Update. finally solved tolerance issues with pla+ print with 6 walls 90% infill. i also reccomend using a polymer paint to finalize the look. feel and dirability of the frame. it fires fine without reinforcement but i use rustolium truck bed coaring for a more proffesional finish. enjoy!
My personal fix to a frame .stl I originally bought off cults3d for the PY2A website's rails. After I found issues with the original frame and rail design from the website. I realized that both frames have a major problem with the front rail missing a slot for the slide lock spring on the frame because the hole was designed too small to print on most printers and there was a gap where the recoil spring rod seats. I liked the compact design soo much. I decided to try and fix the problems by creating a part that simulates both missing components because of the cheap pressed sheet metal style rails. I did have to cut the rails to fit the compact frame. but in concept this part should also fit the original style frames from the website. Either way I included the frame I used with the new part. and a rmr plate just in case you dont have one. if you need further instructions on how to cut the rails to fit. let me know. ill post a youtube video or something.
5.9K
442
Feb 25, 2022
3D Printer
United States
English
No license
QmdFu9cyvAZuHPKCnntnT9UrxME9PWGSHCkcfEeLinSBBA
File | Extension |
---|---|
sev3n's py2a g19 sls insert.stl | stl |
sev3n's g19 rmr slide cover plate.stl | stl |
sev3n's g19 py2a frame.stl | stl |
Version: 1.5.0 latest
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.