3D Printed upper receiver for Ruger MK4.
Recommended ejector: TacSol Metal Ejector of Ruger MK
All other information: See ReadMe
Contact Info:
Instagram: @ghostofebenezermudgett
Email: [email protected]
RECOMMENDED TOOLS:
22LR CHAMBER REAMER (BROWNELLS SKU: 184050010)
OR
APPROPRIATE DRILL BIT (SEE ACWY PROTOBARREL GUIDE)
8MM JOBBER LENGTH DRILL BIT
-- TO CLEAN UP BARREL LINER INTERFACE
-- https://a.co/d/aKnptrr
HARDWARE:
1X 4-40 X 0.25 FLATHEAD
-- ONLY REQUIRED IF 3D PRINTING EJECTOR
-- McMASTER PN: 91781A106 (OR EQUIVELENT)
22LR BARREL LINER
-- 8MM OD
-- SHOULD HAVE EXPERIENCE MAKING 22LR BARRELS
-- REFERENCE EXISITNG TUTORIALS
----- ACWY PROTOBARREL GUIDE
RECOMMENDED PRINT SETTINGS:
-- UPPER ORIENTATION: PRINT FLAT (SEE IMAGES FOLDER)
----- PRINTING AT 45DEG RESULTED IN FAILURE AT BOLT STOP
----- OTHER ORIENTATIONS RESULT IN POOR QUALITY OF CRITIAL
FEATURES
-- EJECTOR ORIENTATION: EXPERIMENTATION NEEDED
---- POSSIBLE STRONGEST ORIENTATION IN IMAGES FOLDER
-- PRINT HEIGHT: .16 OR .20
-- FILAMENT: PLA Pro at a minimum
ACKNOWLEDGEMENT:
-- PIXLE SMOKE
-- KILO
-- IMA
-- SPIN360
-- RANDOM FORUM GUY THAT PROVIDED SOME DIMENSIONS
File | Extension |
---|---|
RUGER MK4 BETA 2023-12-17-20240120T154906Z-001.zip | zip |
Version: 1.0.0 latest
initial upload
3D Printed upper receiver for Ruger MK4.
Recommended ejector: TacSol Metal Ejector of Ruger MK
All other information: See ReadMe
Contact Info:
Instagram: @ghostofebenezermudgett
Email: [email protected]
RECOMMENDED TOOLS:
22LR CHAMBER REAMER (BROWNELLS SKU: 184050010)
OR
APPROPRIATE DRILL BIT (SEE ACWY PROTOBARREL GUIDE)
8MM JOBBER LENGTH DRILL BIT
-- TO CLEAN UP BARREL LINER INTERFACE
-- https://a.co/d/aKnptrr
HARDWARE:
1X 4-40 X 0.25 FLATHEAD
-- ONLY REQUIRED IF 3D PRINTING EJECTOR
-- McMASTER PN: 91781A106 (OR EQUIVELENT)
22LR BARREL LINER
-- 8MM OD
-- SHOULD HAVE EXPERIENCE MAKING 22LR BARRELS
-- REFERENCE EXISITNG TUTORIALS
----- ACWY PROTOBARREL GUIDE
RECOMMENDED PRINT SETTINGS:
-- UPPER ORIENTATION: PRINT FLAT (SEE IMAGES FOLDER)
----- PRINTING AT 45DEG RESULTED IN FAILURE AT BOLT STOP
----- OTHER ORIENTATIONS RESULT IN POOR QUALITY OF CRITIAL
FEATURES
-- EJECTOR ORIENTATION: EXPERIMENTATION NEEDED
---- POSSIBLE STRONGEST ORIENTATION IN IMAGES FOLDER
-- PRINT HEIGHT: .16 OR .20
-- FILAMENT: PLA Pro at a minimum
ACKNOWLEDGEMENT:
-- PIXLE SMOKE
-- KILO
-- IMA
-- SPIN360
-- RANDOM FORUM GUY THAT PROVIDED SOME DIMENSIONS
2.5K
135
Jan 20, 2024
3D Printer
United States
English
No license
File | Extension |
---|---|
RUGER MK4 BETA 2023-12-17-20240120T154906Z-001.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.