Romulan_Charger_22cal_Wildcat_V0.5

about

Romulan Charger .22 caliber Pistol

What is the Romulan Charger?

The Romulan Charger is a 3d printed pistol that uses A Ruger 10-22 bolt and charging handle along with the components from a 10-22 trigger pack. A 10-22 or Charger barrel can be used if of proper length.

The Romulan Charger was inspired from the TV Series Star Trek Picard. Peyton List wielded the Romulan Disrupter in several episodes. I used screen captures from the show as a reference to model from.

If you want to make your own barrel use v0.3.

10-22 barrel and barrrel clamp block was sourced from det_disp.
All hardware was sourced from Mcmaster Carr.
Bolt and Trigger pack were sourced from the internet.

The receiver, FCG housing and forend are 3d printed. PLA+ from eSun works well.

See PDF's for BOM and for custom barrel dimensions.

  • V0.1 first test cracked receiver at buffer pin
  • V0.2 reinforced rear receiver at buffer pin
  • V0.3 reduced size of magazine pocket (v0.3 uses custom barrel)
  • v0.4 changed receiver and current barrel clamp to accommodate 10-22 standard barrel using wedge clamp (v0.4 on uses stock barrel). Changed old barrel clamp file name to forend
  • v0.5 moved receiver barrel clamp wedge to forend to make receiver easier to print added forend filler piece to close gap below barrel

    Thank you ctrlpew for the barrel parts.

files

File Extension
Romulan_Charger_22cal_Wildcat_V0.5.zip zip

versions

Version: 1.0.0 latest

initial upload

about

Romulan Charger .22 caliber Pistol

What is the Romulan Charger?

The Romulan Charger is a 3d printed pistol that uses A Ruger 10-22 bolt and charging handle along with the components from a 10-22 trigger pack. A 10-22 or Charger barrel can be used if of proper length.

The Romulan Charger was inspired from the TV Series Star Trek Picard. Peyton List wielded the Romulan Disrupter in several episodes. I used screen captures from the show as a reference to model from.

If you want to make your own barrel use v0.3.

10-22 barrel and barrrel clamp block was sourced from det_disp.
All hardware was sourced from Mcmaster Carr.
Bolt and Trigger pack were sourced from the internet.

The receiver, FCG housing and forend are 3d printed. PLA+ from eSun works well.

See PDF's for BOM and for custom barrel dimensions.

  • V0.1 first test cracked receiver at buffer pin
  • V0.2 reinforced rear receiver at buffer pin
  • V0.3 reduced size of magazine pocket (v0.3 uses custom barrel)
  • v0.4 changed receiver and current barrel clamp to accommodate 10-22 standard barrel using wedge clamp (v0.4 on uses stock barrel). Changed old barrel clamp file name to forend
  • v0.5 moved receiver barrel clamp wedge to forend to make receiver easier to print added forend filler piece to close gap below barrel

    Thank you ctrlpew for the barrel parts.
Download

creator

Metrics

Views

2.6K

Downloads

170

Project Info

release date

Sep 19, 2023

artifact type

Printable project

library category

Printable Firearms

fabrication methods

Primarily Printable, Printable Lower / Frame

fabrication tool

3D Printer

license

No license

files

File Extension
Romulan_Charger_22cal_Wildcat_V0.5.zip zip

versions

Version: 1.0.0 latest

initial upload

The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.

Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed

Javascript & cookies are required to view this site.