Razor Blade, Lightweight Brace: Laffs Dynamics
This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only.
Skeletonized variant of the original Laffs Dynamics Razor Blade Pistol Brace.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 42%
Support Material Percentage: 18%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
File | Extension |
---|---|
Razor Blade, LW Brace.zip | zip |
Version: 1.0.0 latest
initial upload
Razor Blade, Lightweight Brace: Laffs Dynamics
This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only.
Skeletonized variant of the original Laffs Dynamics Razor Blade Pistol Brace.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 7+
Infill: 42%
Support Material Percentage: 18%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
1.7K
286
Sep 13, 2023
CAD Object, Stereolithic object, Printable project
United States
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
Razor Blade, LW Brace.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.