Introducing MMK 342-S 7.65 mm - Open Bolt Action Semi Automatic Pistol
This model is separated version of the MMK 342. Barrel, Upper Receiver and Lower Receiver are seperated from the Frame part to keep it replaceable.
I am looking for cooperations & partnership or business opportunity to create legalized manufacturing, this model is another example for low cost production.
- This model prepared for .32 ACP(7.65 mm) ammunition, tolerances has been given, but haven't tested, remains as a prototype at this moment.
! RISKS ARE YOUR OWN IF YOU'RE GOING TO TEST THIS MODEL !
- After printing all of the parts(14 parts), you need 4 spring(for trigger, trigger holder, striker, magazine) then ready to go.
- This is an open bolt action, if the magazine is loaded and striker was pulled, it will be ready to fire.
- Two Barrel Connector Pin required.
- Two Receiver Connector Pin required.
- This model can be converted to rifle.
- Barrel and Lower Receiver printable with bigger nozzle without support (0.8, 1 or 1.2 mm)
- For striker part, Nylon+CF or PC filament recommended.
You can reach me via message, twitter or e-mail, Thank you!
File | Extension |
---|---|
MMK 7.65.zip | zip |
Version: 1.0.0 latest
initial upload
Introducing MMK 342-S 7.65 mm - Open Bolt Action Semi Automatic Pistol
This model is separated version of the MMK 342. Barrel, Upper Receiver and Lower Receiver are seperated from the Frame part to keep it replaceable.
I am looking for cooperations & partnership or business opportunity to create legalized manufacturing, this model is another example for low cost production.
- This model prepared for .32 ACP(7.65 mm) ammunition, tolerances has been given, but haven't tested, remains as a prototype at this moment.
! RISKS ARE YOUR OWN IF YOU'RE GOING TO TEST THIS MODEL !
- After printing all of the parts(14 parts), you need 4 spring(for trigger, trigger holder, striker, magazine) then ready to go.
- This is an open bolt action, if the magazine is loaded and striker was pulled, it will be ready to fire.
- Two Barrel Connector Pin required.
- Two Receiver Connector Pin required.
- This model can be converted to rifle.
- Barrel and Lower Receiver printable with bigger nozzle without support (0.8, 1 or 1.2 mm)
- For striker part, Nylon+CF or PC filament recommended.
You can reach me via message, twitter or e-mail, Thank you!
3.3K
197
Jul 7, 2023
CAD Object, Stereolithic object, Printable project, Reference model, DIY Project
Printable Firearms, Printable Magazines, Printable Peripherals / Parts, Reference Models, Other
Primarily Printable, Hybrid, Printable Lower / Frame
3D Printer
United States, Germany, Japan
English, Turkish
Pistol, Rifle, Pistol-Caliber Carbine
Lower Receiver, Upper Receiver, Barrel, Frame, Trigger, Suppressor, Grip, Muzzle Device, Extractor, Loader, Bolt, Trigger Guard, Magazine Release, Follower, Hammer, Magazine, Magazine Bumper, Slide
File | Extension |
---|---|
MMK 7.65.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.