"Lots of Love" (From Texas) Push Dagger: Laffs Dynamics
Offset T-handle push dagger. (T Handle XL sized) Has a short, wide blade for puncturing and opening up an outspread wound channel.
The dagger's spine is non-edged for better durability.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .10mm - .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 36%
Material Flow: 100%
How many times did I hear that before it meant nothing?
File | Extension |
---|---|
Lots of Love, (From Texas) Push Dagger V1.0.1.zip | zip |
Version: "Lots of Love" Push Dagger V1.0.1 latest
"Lots of Love" (From Texas) Push Dagger V1.0.1: Laffs Dynamics
Offset T-handle push dagger. (T Handle XL sized) Has a short, wide blade for puncturing and opening up an outspread wound channel.
The dagger's spine is non-edged for better durability.
Update V1.0.1: Changed recommended print settings for better device strength.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 50%
How many times did I hear that before it meant nothing?
Version: 1.0.0
Initial release
"Lots of Love" (From Texas) Push Dagger: Laffs Dynamics
Offset T-handle push dagger. (T Handle XL sized) Has a short, wide blade for puncturing and opening up an outspread wound channel.
The dagger's spine is non-edged for better durability.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .10mm - .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 36%
Material Flow: 100%
How many times did I hear that before it meant nothing?
3.4K
424
Jan 04, 2023
3D Printer
United States
English
File | Extension |
---|---|
Lots of Love, (From Texas) Push Dagger V1.0.1.zip | zip |
Version: "Lots of Love" Push Dagger V1.0.1 latest
"Lots of Love" (From Texas) Push Dagger V1.0.1: Laffs Dynamics
Offset T-handle push dagger. (T Handle XL sized) Has a short, wide blade for puncturing and opening up an outspread wound channel.
The dagger's spine is non-edged for better durability.
Update V1.0.1: Changed recommended print settings for better device strength.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 7
Infill: 50%
How many times did I hear that before it meant nothing?
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.