Kilroy Graffiti 1911 Grip Panels: Laffs Dynamics
A set of grip panels for the M1911 pistol (and compatible variants) with the "Kilroy Was Here" WWII graffiti imprinted.
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 4 - 6
Infill: 20%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Hardware Needed:
4x 1911 Grip Panel Screws
Accreditations:
PrintYour2A / PY2A: Printed and assembled the grip panels onto their Springfield Armory 1911, as well as advised the print settings for others to manufacture with. Provided images of the panels on the firearm.
File | Extension |
---|---|
Kilroy was Here 1911 Grip Set.zip | zip |
Version: 1.0.0 latest
Initial release
Kilroy Graffiti 1911 Grip Panels: Laffs Dynamics
A set of grip panels for the M1911 pistol (and compatible variants) with the "Kilroy Was Here" WWII graffiti imprinted.
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .20mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 4 - 6
Infill: 20%+
Infill Pattern: Gyroid
Support Material Percentage: 18%
Hardware Needed:
4x 1911 Grip Panel Screws
Accreditations:
PrintYour2A / PY2A: Printed and assembled the grip panels onto their Springfield Armory 1911, as well as advised the print settings for others to manufacture with. Provided images of the panels on the firearm.
1.7K
168
Jul 11, 2022
3D Printer
United States
English
QmacxAWYiV4obAcR4ML92cTiw4oq6p5NsjGBSJgApAGyzR
File | Extension |
---|---|
Kilroy was Here 1911 Grip Set.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.