This is the solid body inversion of the empty space required in a pistol frame to be compatible with a G100 or Spectre 2 Chassis. This model is for designer's and would be used in a boolean cut-styled operation on a given solid body. In Fusion 360 this is commonly done with the Combine tool in the Solids Toolset.
It has been tested both on a pistol format grip module and an invader pdw grip module. Fitment is press fit given 0.2mm layer height with Nylon print medium. Given that the G100/Spectre 2 cassette maintains the critical geometries the only concern is the mag release distance.
This particular design is based off a G100 grip module but future iterations, including the G0, will have more extension modellings to clear space for slide and mag bottom as seen in other internal cutaway projects.
File | Extension |
---|---|
G100 Internals Cutaway/STEP/G100 Internals Cutaway.step | step |
G100 Internals Cutaway/SOURCE/G100 Internals Cutaway.f3d | f3d |
G100 Internals Cutaway/IMAGES/g100 internal cutaway.png | png |
G100 Internals Cutaway/IMAGES/G100 printed.png | png |
G100 Internals Cutaway/IMAGES/G100 print and install.png | png |
G100 Internals Cutaway/IMAGES/G100 Frame over cutaway.png | png |
Version: 1.0.0 latest
Initial Upload
This is the solid body inversion of the empty space required in a pistol frame to be compatible with a G100 or Spectre 2 Chassis. This model is for designer's and would be used in a boolean cut-styled operation on a given solid body. In Fusion 360 this is commonly done with the Combine tool in the Solids Toolset.
It has been tested both on a pistol format grip module and an invader pdw grip module. Fitment is press fit given 0.2mm layer height with Nylon print medium. Given that the G100/Spectre 2 cassette maintains the critical geometries the only concern is the mag release distance.
This particular design is based off a G100 grip module but future iterations, including the G0, will have more extension modellings to clear space for slide and mag bottom as seen in other internal cutaway projects.
1.5K
231
Jun 03, 2024
United States
English
File | Extension |
---|---|
G100 Internals Cutaway/STEP/G100 Internals Cutaway.step | step |
G100 Internals Cutaway/SOURCE/G100 Internals Cutaway.f3d | f3d |
G100 Internals Cutaway/IMAGES/g100 internal cutaway.png | png |
G100 Internals Cutaway/IMAGES/G100 printed.png | png |
G100 Internals Cutaway/IMAGES/G100 print and install.png | png |
G100 Internals Cutaway/IMAGES/G100 Frame over cutaway.png | png |
Version: 1.0.0 latest
Initial Upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.