Construction guide for the DIY AR9.
The 9mm semi-automatic carbine combines 3D printed parts with steel tubing which runs through the printed upper receiver. Steel tubing is also used for the bolt and trunnion assembly.
The firearm is 100% DIY and NO purpose made firearm parts are required.
File | Extension |
---|---|
DIY AR9 (Professor Parabellum).pdf |
Version: 1.0.0 latest
initial upload
Construction guide for the DIY AR9.
The 9mm semi-automatic carbine combines 3D printed parts with steel tubing which runs through the printed upper receiver. Steel tubing is also used for the bolt and trunnion assembly.
The firearm is 100% DIY and NO purpose made firearm parts are required.
6.1K
872
Sep 14, 2023
English
No license
File | Extension |
---|---|
DIY AR9 (Professor Parabellum).pdf |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.