Hello, thanks for checking out my custom Glock Frame! This frame uses DD17.2 Glock 17 rail inserts and a gen 5 slide lock spring.
There are 4 versions in this pack, they are as follows;
GXL17 - Standard G17 frame without a rail
GXLR17 - G17 Frame with a rail
GXL34 - G34 length frame without a rail
GXLR34 - G34 length with a rail
I recommend printing with at least 8 walls minimum, 100% infill, using PLA+ or tougher.
Rails down, it is designed for rails down, printing it any other way will get you blocked and reported to the authorities >:(
File | Extension |
---|---|
DD17.2_SDI_GXL.zip | zip |
Version: 1.0.0 latest
initial upload
Hello, thanks for checking out my custom Glock Frame! This frame uses DD17.2 Glock 17 rail inserts and a gen 5 slide lock spring.
There are 4 versions in this pack, they are as follows;
GXL17 - Standard G17 frame without a rail
GXLR17 - G17 Frame with a rail
GXL34 - G34 length frame without a rail
GXLR34 - G34 length with a rail
I recommend printing with at least 8 walls minimum, 100% infill, using PLA+ or tougher.
Rails down, it is designed for rails down, printing it any other way will get you blocked and reported to the authorities >:(
2.6K
175
Nov 12, 2023
DIY Project, Printable project, Stereolithic object, CAD Object
3D Printer
United States
English
No license
File | Extension |
---|---|
DD17.2_SDI_GXL.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.