DB's Super Perfect 10/22 Receiver by Stinkfoot
DB's 10/22 utilizing 20mm OD barrel sleeve, metric nut replacement of heated inserts
This came about as I noticed significant barrel flex when printed in PA6 nylon, causing zero to be shifted.
Tube source can be found here: https://www.amazon.com/gp/product/B0BFNVPHQ6/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&th=1
The tube will need to be drilled with a 17.5mm drill bit (also available through amazon). I found the easiest way to do this is drill the tube before cutting to size. Those rubber mat things you have in your kitchen for opening stuck lids may help you keep a grip on the tube as it is drilled. I'm sure if you are careful you can place the tube in a vice and drill with a press. Cut tube to 15mm and JBWeld in place.
Along with a metal barrel sleeve, I have added slots for M4 nuts to replace the heated inserts for the V-block. Heated inserts for picatinny rail have been replaced with recesses for M3 nuts.
Included is a model without the barrel sleeve cutout if you feel that it is not necessary.
File | Extension |
---|---|
DB Super Perfect 1022.zip | zip |
Version: 1.0.0 latest
initial upload
DB's Super Perfect 10/22 Receiver by Stinkfoot
DB's 10/22 utilizing 20mm OD barrel sleeve, metric nut replacement of heated inserts
This came about as I noticed significant barrel flex when printed in PA6 nylon, causing zero to be shifted.
Tube source can be found here: https://www.amazon.com/gp/product/B0BFNVPHQ6/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&th=1
The tube will need to be drilled with a 17.5mm drill bit (also available through amazon). I found the easiest way to do this is drill the tube before cutting to size. Those rubber mat things you have in your kitchen for opening stuck lids may help you keep a grip on the tube as it is drilled. I'm sure if you are careful you can place the tube in a vice and drill with a press. Cut tube to 15mm and JBWeld in place.
Along with a metal barrel sleeve, I have added slots for M4 nuts to replace the heated inserts for the V-block. Heated inserts for picatinny rail have been replaced with recesses for M3 nuts.
Included is a model without the barrel sleeve cutout if you feel that it is not necessary.
1.5K
104
Jan 22, 2024
3D Printer
United States
English
No license
File | Extension |
---|---|
DB Super Perfect 1022.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.