Practical Scrap Metal Small Arms Vol. 6 - The MAC-10 Construction Guide
about
Volume 6 of Professor Parabellum's Practical Scrap Metal Small Arms.
This volume provides plans and instructions on creating a 100% DIY MAC-10 submachine gun using only basic materials and tools.
"Detailed herein are plans for a 1:1 copy of the MAC-10 submachine gun, the only differences being the internals having been simplified for ease of home manufacture. For readers familiar with The Box Tube MAC-11 design described in Vol.2 & 5, the construction techniques and tools used in this project are very similar. The design described here is slightly less expedient, though what results is a highly accurate reproduction of the original weapon which will match many factory made examples in quality if care is taken. As before, no lathe or milling machine is needed and only very basic tools are required for construction."
files
| File | Extension |
|---|---|
| Practical_Scrap_Metal_Small_Arms_Vol.06-The_MAC_10_Construction_Guide.pdf |
versions
Version: 1.0.0 latest
Initial release
about
Volume 6 of Professor Parabellum's Practical Scrap Metal Small Arms.
This volume provides plans and instructions on creating a 100% DIY MAC-10 submachine gun using only basic materials and tools.
"Detailed herein are plans for a 1:1 copy of the MAC-10 submachine gun, the only differences being the internals having been simplified for ease of home manufacture. For readers familiar with The Box Tube MAC-11 design described in Vol.2 & 5, the construction techniques and tools used in this project are very similar. The design described here is slightly less expedient, though what results is a highly accurate reproduction of the original weapon which will match many factory made examples in quality if care is taken. As before, no lathe or milling machine is needed and only very basic tools are required for construction."
creator
Metrics
Views
4.5K
Downloads
822
Project Info
release date
Jun 07, 2022
artifact types
Blueprint, Document
library category
Blueprints
fabrication method
Machinable
fabrication tools
Drill Press, Angle Grinder, Welder
language
English
license
No license
Firearm Info
type
SMG
platform
MAC-10
caliber
9x19mm
version hash
QmVooYiewFAunsd23rkxPw7ijonNxemh7TXTZXAyaQFbWT
files
| File | Extension |
|---|---|
| Practical_Scrap_Metal_Small_Arms_Vol.06-The_MAC_10_Construction_Guide.pdf |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
