ANDABATA Gun Vision System

about

The ANDABATA is the vision system created for my KAC ChainSAW inspired AR15 conversion kit. This kit allows the end user to place an analog FPV camera on the platform , and view it remotely from the BPNVG or the dedicated receiver.

The ANDABATA housing is two parts, and contains the following:

-A Runcam Night Eagle 3. A regular Eagle 3 can be used and the end user can also remove the IR filter from a standard Eagle 3.
-A 9v battery and 9v battery connector harness.
-A waterproof toggle switch.
-A wire for transferring the signal to the receiver. I used a 12v power plug so that if the unit is pulled or I forget to unplug the unit and set the platform down the cord can pull free of the connector instead of damaging the unit.

4x 40mm to 45mm long M5 bolts or similar, and nuts are the hardware sandwiching the two halves together and retaining the picatinny mount, and one 45mm long m5 bolt and nut are needed for the picatinny crossbolt. The unit can be raised with spacers and the four bolts will need to be lengthened an equal amount.

There is a top cover version with and without a logo. The Andabata is a punitive class of gladiator who were equipped with a helmet without eye holes. This is referential to the otherwise useless nature of the ChainSAW platform without it, and that it replaces the end users vision.

files

File Extension
ANDABATA.zip zip

versions

Version: 1.0.0 latest

Initial release

about

The ANDABATA is the vision system created for my KAC ChainSAW inspired AR15 conversion kit. This kit allows the end user to place an analog FPV camera on the platform , and view it remotely from the BPNVG or the dedicated receiver.

The ANDABATA housing is two parts, and contains the following:

-A Runcam Night Eagle 3. A regular Eagle 3 can be used and the end user can also remove the IR filter from a standard Eagle 3.
-A 9v battery and 9v battery connector harness.
-A waterproof toggle switch.
-A wire for transferring the signal to the receiver. I used a 12v power plug so that if the unit is pulled or I forget to unplug the unit and set the platform down the cord can pull free of the connector instead of damaging the unit.

4x 40mm to 45mm long M5 bolts or similar, and nuts are the hardware sandwiching the two halves together and retaining the picatinny mount, and one 45mm long m5 bolt and nut are needed for the picatinny crossbolt. The unit can be raised with spacers and the four bolts will need to be lengthened an equal amount.

There is a top cover version with and without a logo. The Andabata is a punitive class of gladiator who were equipped with a helmet without eye holes. This is referential to the otherwise useless nature of the ChainSAW platform without it, and that it replaces the end users vision.

Download

creator

Metrics

Views

2.2K

Downloads

159

Project Info

release date

Nov 17, 2022

artifact type

Printable project

library category

Printable Peripherals / Parts

fabrication method

Primarily Printable

fabrication tool

3D Printer

release country

United States

language

English

license

Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International

files

File Extension
ANDABATA.zip zip

versions

Version: 1.0.0 latest

Initial release

The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.

Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed

Javascript & cookies are required to view this site.