AG-PTM-40 Grenade Sabot

Purchase high-quality prints of Laffs Dynamics designs at avesrails.com

about

AG-PTM-40 Grenade Sabot: Laffs Dynamics

 

A three part sabot for launching Sabre Red AG-PTM-40 4.0oz OC Gas Grenades out of a X Products Can Cannon Upper.

 

 

 

Printer Used: Ender 3 V2

 

Filament Used: PLA+

 

Print Settings:

 

Extruder: 218C

Bed: 56C 

First Layer Print Height: .2mm 

Standard Layer Height: .16mm

Wall Perimeters: 8+ 

Infill: 75%+

Infill Pattern: Gyroid

Support Material Percentage: 18%

 

 

 

Assembly and Usage: 

 

1) Place a AG-PTM-40 grenade between three sabot shells.

 

2) Wrap a rubber band around the central ridge to keep it together as a single unit during storage and transportation.

 

3) Before use, remove the protective cap from the top of the grenade. 

 

4) Insert the sabot/grenade unit into the bore of the Can Cannon, right below the central ridge with the rubber band. 

 

5) Cut off the rubber band holding the three sabot shells together. 

 

6) Insert the rest of the sabot/grenade unit down the launch tube. 

 

7) Once seated, quickly press down the grenade's release valve (Be careful to not get OC gas to spray directly towards your face)

 

8) Aim, and fire a blank cartridge to launch the grenade. (Be aware the grenade will release gas for ~14 seconds, so no dillydallying.)

 

 

 

Notes: 

 

1) Before use, be sure you are using an air filtration unit, preferably a gas mask with at least P3 - P3R rated filters.

 

2) The grenades used in conjunction with the three part sabot are not (federally in the United States) illegal, but might not be legal to own within your own state, as some states (Ex. MI) restrict the amount of OC that can be contained in a release device. 

 

3) Sabre Corporation will not sell the AG-PTM-40 grenades to standard civilians. That being said, these are grey market items, and are federally legal. Just search up the grenade designation and you should find some URL links to online stores that WILL sell to ppl. (Hint: Ebay is a personal source. Been buying them there for over a year now with 0 problems.) 

 

4) The X Products Can Cannon is not considered a Destructive Device per ATF. That being said, its best to assume launching area denial 

grenades with your personal Can Cannon will most likely mark your's as one. Research your local and federal laws before use with the sabot / grenade combination. (I aint ye daddy; won't tell ya what to do.)

files

File Extension
Overview.zip zip

versions

Version: 1.0.0 latest

initial upload

about

Purchase high-quality prints of Laffs Dynamics designs at avesrails.com

AG-PTM-40 Grenade Sabot: Laffs Dynamics

 

A three part sabot for launching Sabre Red AG-PTM-40 4.0oz OC Gas Grenades out of a X Products Can Cannon Upper.

 

 

 

Printer Used: Ender 3 V2

 

Filament Used: PLA+

 

Print Settings:

 

Extruder: 218C

Bed: 56C 

First Layer Print Height: .2mm 

Standard Layer Height: .16mm

Wall Perimeters: 8+ 

Infill: 75%+

Infill Pattern: Gyroid

Support Material Percentage: 18%

 

 

 

Assembly and Usage: 

 

1) Place a AG-PTM-40 grenade between three sabot shells.

 

2) Wrap a rubber band around the central ridge to keep it together as a single unit during storage and transportation.

 

3) Before use, remove the protective cap from the top of the grenade. 

 

4) Insert the sabot/grenade unit into the bore of the Can Cannon, right below the central ridge with the rubber band. 

 

5) Cut off the rubber band holding the three sabot shells together. 

 

6) Insert the rest of the sabot/grenade unit down the launch tube. 

 

7) Once seated, quickly press down the grenade's release valve (Be careful to not get OC gas to spray directly towards your face)

 

8) Aim, and fire a blank cartridge to launch the grenade. (Be aware the grenade will release gas for ~14 seconds, so no dillydallying.)

 

 

 

Notes: 

 

1) Before use, be sure you are using an air filtration unit, preferably a gas mask with at least P3 - P3R rated filters.

 

2) The grenades used in conjunction with the three part sabot are not (federally in the United States) illegal, but might not be legal to own within your own state, as some states (Ex. MI) restrict the amount of OC that can be contained in a release device. 

 

3) Sabre Corporation will not sell the AG-PTM-40 grenades to standard civilians. That being said, these are grey market items, and are federally legal. Just search up the grenade designation and you should find some URL links to online stores that WILL sell to ppl. (Hint: Ebay is a personal source. Been buying them there for over a year now with 0 problems.) 

 

4) The X Products Can Cannon is not considered a Destructive Device per ATF. That being said, its best to assume launching area denial 

grenades with your personal Can Cannon will most likely mark your's as one. Research your local and federal laws before use with the sabot / grenade combination. (I aint ye daddy; won't tell ya what to do.)

Download

Metrics

Views

2.2K

Downloads

205

Project Info

release date

Aug 16, 2023

artifact types

CAD Object, Stereolithic object, Printable project

library category

Ammunition

fabrication methods

Primarily Printable, Hybrid

release country

United States

language

English

license

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International

Firearm Info

types

Grenade Launcher, Launcher, Grenade

platform

AR-15

caliber

.223 / 5.56x45

part

Ammunition

files

File Extension
Overview.zip zip

versions

Version: 1.0.0 latest

initial upload

The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.

Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed Ghost Gunner 3s, GG3s, True Desktop CNC, by Defense Distributed

Javascript & cookies are required to view this site.