Razor Blade-FL Brace
about
Razor Blade-FL Brace: Laffs Dynamics
This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Support Material Percentage: 18%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
files
| File | Extension |
|---|---|
| Razor Blade, FL.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
Razor Blade-FL Brace: Laffs Dynamics
This brace is designed for Milspec (6 Position) Carbine Buffer Tubes only.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5+
Infill: 32%
Support Material Percentage: 18%
Hardware Needed:
1x M8x12 Hex Socketed Set Screw
creator
Metrics
Views
414
Downloads
49
Project Info
release date
Jan 13, 2023
artifact type
Printable project
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
fabrication tool
3D Printer
release country
United States
language
English
license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0
Firearm Info
type
Pistol
platform
AR-15
part
Brace
files
| # | File | Extension |
|---|---|---|
| 1 | Razor Blade, FL.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
