Raven AKM Grip
about
Raven AKM Grip: FFFTech/FFFTechnology
An AKM grip with a shallow rounded backstrap and frontal section.
A fairly wide grip, swells from 24.2mm, (Excluding grip top reinforcement) to 30.1mm towards the bottom. From front to back, the longest point is roughly 52mm.
The top section's reinforcement is based off the AK12 and AK15 grip.
Comes in two variants:
*Standard
*Ridged
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
files
| File | Extension |
|---|---|
| Raven AKM Grip.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
Raven AKM Grip: FFFTech/FFFTechnology
An AKM grip with a shallow rounded backstrap and frontal section.
A fairly wide grip, swells from 24.2mm, (Excluding grip top reinforcement) to 30.1mm towards the bottom. From front to back, the longest point is roughly 52mm.
The top section's reinforcement is based off the AK12 and AK15 grip.
Comes in two variants:
*Standard
*Ridged
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 220C
Bed: 56C
First Layer Print Height: .2mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4+
Infill: 25%+
Infill Pattern: Gyroid
Material Flow: 100%
Print the grip upside down
Hardware Needed:
1x OEM AK Grip Screw
creator
Metrics
Views
860
Downloads
140
Project Info
release date
May 15, 2022
artifact type
Printable project
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
fabrication tool
3D Printer
release country
United States
language
English
license
Firearm Info
type
Rifle
platform
AKM
part
Grip
version hash
QmRAf3sWVSfuKPbBtVV7gudRFsmEBrVtHnuEWdWqun6wie
files
| # | File | Extension |
|---|---|---|
| 1 | Raven AKM Grip.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
