Enhanced Evo Safety Levers: Model-F V1.1.2
about
Enhanced Evo Safety Levers Model-F V1.1.2: FFFTech/FFFTechnology
3D printed safety levers for the CZ Scorpion Evo III. OEM safety levers are known to dig into weapon user's index fingers; causing discomfort, and sometimes leading the user to bleed.
This set places the levers forward and above the index finger, allowing clearance for a proper firing grip. The safeties are beveled out slightly, and have texturing on the levers for easy manipulation when switching from fire to safe.
Update V1.1.2: Changed model designation. Increased selector throw lever thickness by .5mm.
Updated print settings for the common used Ender 3 3D printers.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 4 - 6
Infill: 32%
Infill Pattern: Gyroid
Material Flow: 100%
files
| File | Extension |
|---|---|
| Enhanced Evo Safety Levers Model-F V1.1.2.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
Enhanced Evo Safety Levers Model-F V1.1.2: FFFTech/FFFTechnology
3D printed safety levers for the CZ Scorpion Evo III. OEM safety levers are known to dig into weapon user's index fingers; causing discomfort, and sometimes leading the user to bleed.
This set places the levers forward and above the index finger, allowing clearance for a proper firing grip. The safeties are beveled out slightly, and have texturing on the levers for easy manipulation when switching from fire to safe.
Update V1.1.2: Changed model designation. Increased selector throw lever thickness by .5mm.
Updated print settings for the common used Ender 3 3D printers.
Printer Used: Ender 3 V2
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .12mm
Wall Thickness: .40
Wall Perimeters: 4 - 6
Infill: 32%
Infill Pattern: Gyroid
Material Flow: 100%
creator
Metrics
Views
1.9K
Downloads
277
Project Info
release date
May 23, 2022
artifact type
Printable project
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
fabrication tool
3D Printer
release country
United States
language
English
license
Firearm Info
type
Pistol
platform
Scorpion EVO
caliber
9x19mm
part
Safety Lever
version hash
QmVX3rCpLsmNDhEVjMuuPZ17V7YZ3Gjkv9fA8h1y8eqg19
files
| File | Extension |
|---|---|
| Enhanced Evo Safety Levers Model-F V1.1.2.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
