Precision Grip (AR-15)
about
Precision Grip (AR-15): FFFTech/FFFTechnology
A design created mimicking the PSG-1's grip. Has a palm rest that can be adjusted vertically, and also can be adjusted for different pitch and roll angles. The top of the grip area has thumb rests that extend 9mm forward. Has wide finger grooves.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
(Support material only needed for finger grooves, underside of thumb rests, and through bolt slots.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
1x M5x40 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
files
| File | Extension |
|---|---|
| Precision Grip.zip | zip |
versions
Version: 1.0.0 latest
Initial release
about
Precision Grip (AR-15): FFFTech/FFFTechnology
A design created mimicking the PSG-1's grip. Has a palm rest that can be adjusted vertically, and also can be adjusted for different pitch and roll angles. The top of the grip area has thumb rests that extend 9mm forward. Has wide finger grooves.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 216C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 4
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
(Support material only needed for finger grooves, underside of thumb rests, and through bolt slots.)
Hardware Needed:
1x Allen Head Screw, 1/4-28 x 1"
1x Steel Star Washer
1x Safety Selector Detent Pin
1x Safety Selector Detent Spring
1x M5x40 Hex Socketed Machine Screw/Bolt
1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)
creator
Metrics
Views
7.2K
Downloads
998
Project Info
release date
Jun 13, 2022
artifact type
Printable project
library category
Printable Peripherals / Parts
fabrication method
Primarily Printable
release country
United States
language
English
license
Firearm Info
types
Pistol, Rifle, Pistol-Caliber Carbine
part
Grip
version hash
QmbAqETDokfALwoBfLo2DiczF2yKLsq7jbsDk4T6FNHqLy
files
| File | Extension |
|---|---|
| Precision Grip.zip | zip |
versions
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
