The B.A.L.L.S. is a 37mm repeating signalling device. This launcher accepts payload with a maximum length of 95mm and smaller.
Please follow the guides as this is a 100% DIY build with alot of hardware.
The B.A.L.L.S. has a 26.5mm variant called the Sm.A.L.L.S. which is also released.
Parts kits are available through INMC (Link) and Deadhead Parts (Link)
Enjoy!
File | Extension |
---|---|
B.A.L.L.S. Release Folder V1.0.0.zip | zip |
Version: 1.0.0 latest
Initial release
The B.A.L.L.S. is a 37mm repeating signalling device. This launcher accepts payload with a maximum length of 95mm and smaller.
Please follow the guides as this is a 100% DIY build with alot of hardware.
The B.A.L.L.S. has a 26.5mm variant called the Sm.A.L.L.S. which is also released.
Parts kits are available through INMC (Link) and Deadhead Parts (Link)
Enjoy!
8.3K
819
Oct 18, 2022
Printable project
Printable Firearms
Primarily Printable, Hybrid
3D Printer
United States
English
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
Launcher
37mm
File | Extension |
---|---|
B.A.L.L.S. Release Folder V1.0.0.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.