DPNVG mk3 (DIY Quad Nod NVG)
about
****IMPORTANT****
i found a mistake about the camera register settings in firmware so i fixed it
for those who downloaded dpnvg_mk3.zip file before 2021-10-01, i swapped the file
to fixed one so download it again
helmet
(recommend putting it on a helmet. otherwise it'll bounce around whenever you move)
https://www.aliexpress.com/item/4000025715756.html?spm=a2g0s.9042311.0.0.27424c4dZGEODN
parts list, instructions in the video above
Printer:
custom
Rafts:
Supports:
Resolution:
Infill:
Filament brand:
Filament color:
Black
Filament material:
abs
Notes:
doesn't matter
files
| File | Extension |
|---|---|
| README.txt | txt |
| dpnvg_mk3.zip | zip |
| dpnvg_mk3_beam.stl | stl |
| dpnvg_mk3_beam_axis.stl | stl |
| dpnvg_mk3_bridge.stl | stl |
| dpnvg_mk3_led_mount.stl | stl |
| dpnvg_mk3_lense_cover_left.stl | stl |
| dpnvg_mk3_lense_cover_right.stl | stl |
| dpnvg_mk3_link_left.stl | stl |
| dpnvg_mk3_link_right.stl | stl |
| dpnvg_mk3_lower_left.stl | stl |
| dpnvg_mk3_lower_right.stl | stl |
| dpnvg_mk3_mount_body.stl | stl |
| dpnvg_mk3_mount_detent.stl | stl |
| dpnvg_mk3_mount_left.stl | stl |
| dpnvg_mk3_mount_right.stl | stl |
| dpnvg_mk3_upper_left.stl | stl |
| dpnvg_mk3_upper_right.stl | stl |
versions
Version: 1.0.0+ latest
Reuploaded for DEFCAD with additional README
Version: 1.0.0
Initial release
about
****IMPORTANT****
i found a mistake about the camera register settings in firmware so i fixed it
for those who downloaded dpnvg_mk3.zip file before 2021-10-01, i swapped the file
to fixed one so download it again
helmet
(recommend putting it on a helmet. otherwise it'll bounce around whenever you move)
https://www.aliexpress.com/item/4000025715756.html?spm=a2g0s.9042311.0.0.27424c4dZGEODN
parts list, instructions in the video above
Printer:
custom
Rafts:
Supports:
Resolution:
Infill:
Filament brand:
Filament color:
Black
Filament material:
abs
Notes:
doesn't matter
creator
Metrics
Views
3.3K
Project Info
release date
Sep 27, 2021
artifact type
Printable project
library category
Printable Peripherals / Parts
fabrication method
Hybrid
fabrication tool
3D Printer
release country
United States
language
English
license
version hash
QmZ8W1SYNz8ECjLux7HAJLNtRdgYJRMDGbkkTJ6fNgn4gB
files
| File | Extension |
|---|---|
| README.txt | txt |
| dpnvg_mk3.zip | zip |
| dpnvg_mk3_beam.stl | stl |
| dpnvg_mk3_beam_axis.stl | stl |
| dpnvg_mk3_bridge.stl | stl |
| dpnvg_mk3_led_mount.stl | stl |
| dpnvg_mk3_lense_cover_left.stl | stl |
| dpnvg_mk3_lense_cover_right.stl | stl |
| dpnvg_mk3_link_left.stl | stl |
| dpnvg_mk3_link_right.stl | stl |
| dpnvg_mk3_lower_left.stl | stl |
| dpnvg_mk3_lower_right.stl | stl |
| dpnvg_mk3_mount_body.stl | stl |
| dpnvg_mk3_mount_detent.stl | stl |
| dpnvg_mk3_mount_left.stl | stl |
| dpnvg_mk3_mount_right.stl | stl |
| dpnvg_mk3_upper_left.stl | stl |
| dpnvg_mk3_upper_right.stl | stl |
versions
Version: 1.0.0+ latest
Reuploaded for DEFCAD with additional README
Version: 1.0.0
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.
