22lr Suppressor
by nameisnight
Wanted to mess around with geometry and see if i could make a better baffle then the round ones normaly made.
We need to think outside the box with 3D printing, We are no longer stuck making round baffles.
Tested Print Settings
PLA+ or Better
.12mm Layers
5 Walls
100% Infill
Print with up, front port on hotplate
No Supports
Threaded in 1/2-28, Tested with 22lr Sub-Sonics and Standard.
Be sure to inspect the suppressor to make sure there is no deformation or melted areas.
File | Extension |
---|---|
22lr Suppresser D1.2.zip | zip |
Version: 1.0.0 latest
initial upload
22lr Suppressor
by nameisnight
Wanted to mess around with geometry and see if i could make a better baffle then the round ones normaly made.
We need to think outside the box with 3D printing, We are no longer stuck making round baffles.
Tested Print Settings
PLA+ or Better
.12mm Layers
5 Walls
100% Infill
Print with up, front port on hotplate
No Supports
Threaded in 1/2-28, Tested with 22lr Sub-Sonics and Standard.
Be sure to inspect the suppressor to make sure there is no deformation or melted areas.
4.7K
723
Aug 1, 2023
CAD Object, Stereolithic object, Printable project, DIY Project
3D Printer
United States
English
No license
File | Extension |
---|---|
22lr Suppresser D1.2.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.