Longer muzzle compensator variant of the original 10/22 Gothic Compensator.
Print Settings:
Hardware Needed:
SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired.
File | Extension |
---|---|
1022 Gothic XL Comp.zip | zip |
Version: 1.0.0 latest
initial upload
Longer muzzle compensator variant of the original 10/22 Gothic Compensator.
Print Settings:
Hardware Needed:
SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired.
969
150
Sep 27, 2023
CAD Object, Stereolithic object, Printable project
English
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
File | Extension |
---|---|
1022 Gothic XL Comp.zip | zip |
Version: 1.0.0 latest
initial upload
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.