10/22 AKMesque Slant Brake 35 Right: FFFTech/FFFTechnology
A muzzle brake that mimics the aesthetics and function of the AKM's muzzle device; canted 35 deg to the right.
When firing, the impulse should push the muzzle down and to the right.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Needed:
1x M3x16 Set Screw
SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired.
File | Extension |
---|---|
10-22 Slant Brake 35 Right.zip | zip |
Version: 1.0.0 latest
Initial release
10/22 AKMesque Slant Brake 35 Right: FFFTech/FFFTechnology
A muzzle brake that mimics the aesthetics and function of the AKM's muzzle device; canted 35 deg to the right.
When firing, the impulse should push the muzzle down and to the right.
Printer Used: Monoprice Maker Select Plus
Filament Used: PLA+
Print Settings:
Extruder: 218C
Bed: 56C
First Layer Print Height: .18mm
Standard Layer Height: .16mm
Wall Thickness: .40
Wall Perimeters: 5 - 7
Infill: 50%
Infill Pattern: Gyroid
Material Flow: 100%
Support Material Percentage: 20%
Hardware Needed:
1x M3x16 Set Screw
SAFETY NOTE: Due to this design coming into contact with hot metal and gasses, it's HIGHLY recommended to print the design, and use Lost PLA Casting in metal for the finished object. The printed version CAN be used, but should not be expected to retain structural rigidity for more than a few dozen rounds fired.
1.2K
102
Apr 28, 2022
3D Printer
United States
English
QmdFb3fny8ivuVUW4ngKq5DphtdDYmHSH11zSrEfsmZhaB
File | Extension |
---|---|
10-22 Slant Brake 35 Right.zip | zip |
Version: 1.0.0 latest
Initial release
The files shown on this site are only available to U.S. Persons, as defined at 22 C.F.R. 120.15. The files are also not available to persons outside the United States or to residents of and persons in the State of New Jersey, with the exception of Federal Firearms Licensees.